Availability of 2,000 Pound Timbren Axle-Less System with 6 Hub Face Dimension
Question:
In your diagram measurement for part# A20rs545 you show a hubface measurment of 4 7/8 in. I am looking for a part # that would allow measurment to replace 1800 lb axle on a pwc trailer without brakes. In order to do a bolt on installation and not cutoff and reweld my fenders. I NEED A HUBFACE MEASUREMENT OF 6 inches with 5 on 4 1/2 Hhubs any suggestions? Thank you
asked by: JMA
Expert Reply:
For your trailer we have the Timbren Axle-Less Trailer Suspension System # ASR2000S02 that has a 2,000 pound weight capacity and a hub face dimension of right at 6 inches (see attached image).
This particular assembly does not include idler hubs but they can be added with the etrailer.com # AKIHUB-545-35-EZ-K. These hubs feature the 5 on 4-1/2 inch bolt pattern you're needing and includes the bearings, races, and seal.
I have attached a couple short video demonstrations that you can check out as well.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Q&A: Ladder Rack Compatible With Pace Edwards Ultragroove Tonneau on 2023 Ford F-150 With 6-1/2 Foot Bed
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for Al-Ko B850-3 Trailer Axle Needed
- Q&A: What is the Difference Between Regular and Off Road Trailer Tires for Timbren Axleless Suspension
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Q&A: Timbren Axle Less Kit with 5 Lug Bolt Pattern that Can be Used with 15 inch Wheel
- Q&A: Dimensional Drawing for Dutton-Lanison Rigid Marine Jack
- Q&A: Largest Recommended Wheel and Tire For Use With Timbren Axle-Less Trailer Suspension # A20RS545
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs