How to Use Load Extender With 1-1/4 Inch Trailer Hitch
Question:
Want to extend hitch out 24-36 inch. With adjustable height and. Need to cary canoe but need little support. Got anything. Thanks
asked by: Don
Expert Reply:
We do have a solution for you, though you will need to use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD because there aren't any load extenders for 1-1/4 inch hitches. Also keep in mind that this (or any) adapter does reduce the capacity of your hitch by 50 percent, so you'll need to make sure the weight of your canoe and load extender does not exceed 50 percent of the tongue weight capacity on your hitch. To secure the adapter in your hitch you'll need Pin and Clip # # PC2.
Then for a load extender I recommend the Yakima LongArm Bed and Roof Load Extender # Y01149-1150 because it is not only adjustable in height and length, as you can see by the accompanying cut out, but it is also just 12 lbs, meaning you will have more capacity remaining for your canoe with the LongArm than with any other extender.
It comes with an anti-rattle pin though you can secure it to your hitch with the Yakima HitchLock # Y07235, and I also recommend the Crossbar Pad # Y07417 to cushion your kayak while you are en route to the water.
I have added links to a couple video reviews of the LongArm for you which I recommend taking a look at.
Products Referenced in This Question
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Yakima LongArm Bed and Roof Load Extender for 2" Hitches - Aluminum - 165 lbs
- Truck Bed Extender
- Adjustable Height
- Hitch Load Extender
- Aluminum
- Black
- Yakima
more information >
Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS)
- Trailer Hitch Lock
- Rack Specific Locks
- Keyed Alike
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- For Yakima Racks
- Yakima
more information >
Crossbar Pad for Yakima LongArm Load Extender - 28" Long - Qty 1
- Accessories and Parts
- Hitch Cargo Carrier
- Watersport Carriers
- Load Extender Parts
- Pads
- LongArm
- Yakima
more information >
Product Page this Question was Asked From
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: E-Bike Rack Recommendation for Travel Trailer to Carry Aventon 500 and Carbon Frame Bike
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Hitch Receiver Sizes
- Q&A: How to Use Thule T2 Pro XTR for 1-1/4 inch Hitch in 2 inch Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Single Bike Rack for a Tern HSD P9 Bike With Fenders
- Q&A: Will 2015 Mini Cooper Center Exhaust Damage Trailer While Towing
- Q&A: Is There a Trailer Hitch & Wiring For 2024 Chevy Trax
- Q&A: How to Wire Two 6-Volt Batteries In Series to Double Output Voltage
- Article: Rooftop Cargo Carriers
- Article: Hitch Adapters and Extenders
- Article: Best Bike Racks for Electric Bikes
- Article: Best Bike Racks for Fat Bikes