Hooking Up Wiring for a Third Brake Light on a Camper Shell for a 2008 GMC Sierra
Question:
Just need some basic instruction on to wire the canopy brake light to the truck?
asked by: Ed K
Expert Reply:
You have a couple of places you can look for the center high mount stop light (CHMSL) circuit on your 2008 GMC Sierra. First, you can check beneath the truck where the trailer wiring runs underneath. You can test the wiring there with a circuit tester like # PTW2993 if needed, to determine if any of the wires in the loom are dedicated brake light wires.
If you have a wire bundle or trailer wiring leading to a trailer connector located above the spare tire, look for a light blue wire and test it for function to determine if it is the correct wire.
The wire could also be along the driver side frame rail near the back of the truck specifically for a camper shell brake light.
Finally, under the dash and below the steering column there is a tow package wiring bundle that is held together with a white tag. In this wire bundle there should several wires and the functions of each will be on the tag. Test the wires and find the one that only shows a signal when the brake pedal is pressed but not when the turn signals are on.
Products Referenced in This Question
Product Page this Question was Asked From
Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Continue Researching
- Shop: 3rd Brake Light Logic Module
- Shop: Trailer Wiring
- Search Results: chmsl
- Search Results: truck cap wiring
- Shop: Hook Probe Circuit Tester
- Shop: Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: How To Wire Third Brake Light for Truck Cap on Chevy Colorado
- Q&A: Connecting 3rd Brake Light of Truck Camper Shell to 2013 GMC Sierra Wiring Harness
- Q&A: Where to Access the Third Brake Light Circuit on a 2008 Chevy Silverado/GMC Sierra 1500
- Q&A: 1999-2006 Chevy Silverado Third Brake Light Wiring Source for Camper Shell
- Q&A: Wiring A 3rd Brake Light For An ARE Camper Sheller For A 2002 Chevrolet Silverado 2500HD
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Search Results: brake controller
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer brake controller
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Review
- Search Results: hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)