Install Diagram for Single Zone Controller for Furrion Chill RV Air Distribution Box

Question

Question:

Is there a wiring diagram or installation details so I can make certain this is installed properly?

asked by: Wayne

0

Expert Reply:

I attached a picture I got from Furrion that shows a wiring diagram for the # FACC12SA-BL as well as an install video for you to check out.

expert reply by: Jameson C

0

click to enlarge

Wilkiam

6/9/2020

I bought a furrion ac and it didn’t come with a control box can I use the Colman Mach control box

Reply

Chris R.

6/12/2020

If you have an existing Coleman Mach setup, what you can do is add the Wiring Adapter # C-FACR15SA-A01, which will allow you to hook up the Furrion AC unit to your current control box.

Reply

Answer 1

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, #FR86PR.

view full answer...

Answer 2

There is a diagram of the wiring for the Furrion #FR58PR in the instructions, but I've gone ahead and linked a photo of the wiring diagram as well as the instructions for this unit.

view full answer...

Answer 3

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are…

view full answer...

Answer 4

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

view full answer...

Answer 5

Yes, you can replace your Dometic rooftop AC unit (condenser unit) with a Furrion one and still be able to use your existing thermostat and wiring. You just may need an adapter #ACCOLKIT to go from the wiring harness on the Furrion unit to the…

view full answer...

Answer 6

The bare copper wire with clear tube on the control box of the distribution for the Furrion Chill HE RV Air Conditioner System part #FR92PR is an air temp sensor. It needs to be pointed straight up toward the overhead unit. It does not correct…

view full answer...

Answer 7

Furrion wall thermostats like the part #FR55PR do require wiring to install as they do not have a wireless way to receive power or communicate with the AC unit. Running wiring through the walls is similar to how wiring in a house is done. It's…

view full answer...

Answer 8

That is a great question! I reached out to my contact at Furrion and the wires of the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup #FACC12SA-BL have a few different bundles. The first bundle has 6 wires in it and is…

view full answer...

Answer 9

The Furrion Chill HE RV #FR67FJ does not have Bluetooth it is wired. So one of the four prong connector cables would run from one AC to the other AC and then from there, would run to the thermostat. I've attached a wiring diagram of this provided…

view full answer...

Answer 10

Furrion Chill Replacement RV Air Conditioner for Coleman Setup #FR42PV is 13-5/8" tall and the conversion brackets are on the inside of the cutout so the total height above the camper would be 13-5/8". The Furrion rooftop units have…

view full answer...

Answer 11

I reached out to Lippert who informed me your Power Gear controller 140-1224 Rev 0G is obsolete. It was replaced with the Lippert part number 372854 but that part is also now obsolete. At this point your options are to try and have your controller…

view full answer...

Answer 12

Your Furrion Chill Replacement RV Air Conditioner freezing only after a few hours of use is probably due to the freeze sensor not being installed correctly to the cooling fins. The freeze sensor detects when the unit starts to freeze and the censor…

view full answer...

Install Diagram for Single Zone Controller for Furrion Chill RV Air Distribution Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching