Dimensions of Replacement Fan Blades 277-000398

Question

Question:

We are looking for 16 1/2 inch fan blade

asked by: Stone

0

Expert Reply:

The Replacement Fan Blades # 277-000398 are 16-5/8-inches long. They measure 4-7/8-inches wide at their widest point and 4-inches wide at their narrowest point. These install onto brackets like # 277-000399 which then attach to the fan itself.

expert reply by: Adam R

0

click to enlarge

Answer 1

I measured the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan #277-000398 for you and they are 16- 5/8 inches long with 4 inches wide at the bottom and 4-7/8 inches wide at the top. I've attached a photo to assist.

view full answer...

Answer 2

The holes that mount to the motor for the Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light #277-000399 do measure 1-1/2" on center just like what you have. I have attached a photo that has additional measurements that…

view full answer...

Answer 3

None of our suppliers offer a 6 inch stand-off, but a 12 inch version is available as part #SC8531. The end cap could be removed, then the stand-off could be cut down to the desired 6 inch length. You'd then reinstall the end cap and be good to…

view full answer...

Answer 4

The Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light - Qty 4 #277-000399 does match the 1-1/2" and 3-7/16" measurements provided, so you can use these on your ceiling fan. If you also need new fan blades, the…

view full answer...

Answer 5

Although we do not have replacement fan blades with those exact measurements, the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan #277-000398 may work for you. These have similar dimensions with a length of 16-5/8" and…

view full answer...

Answer 6

The RV Scare Light, RVSL31, uses an 1156 bulb. A white LED 1156 like #DI85VR would fit the socket. This light has not been tested with LED bulbs though so I cannot guarantee that it will work.

view full answer...

Answer 7

The Replacement Hardware Pack for AirrForce 42" Hugger Style RV Ceiling Fan #277-000408 comes with 12 fan blade screws and 1 pull chain for your 42" Hugger Style RV Ceiling Fan with Light Kit for RVs. This kit will include all the hardware…

view full answer...

Answer 8

What you are looking for is the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan #277-000398. These are the exact replacements for the 42" Hugger Style RV Ceiling Fan.

view full answer...

Answer 9

Since RV makers don't keep track of smaller items like the fans and vents they install there is no way to look up the specific unit you have but if you check the fan you can usually find a manufacturer name and part number. The replacement…

view full answer...

Answer 10

According to the manufacturer the #277-000399 replacement brackets will probably work for a AirrForce 42" hugger-style 4-blade ceiling fan without a light. They said they believe the same brackets are used for both. Since there is some…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Dimensions of Replacement Fan Blades 277-000398

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching