Replacement Bathroom Vent for 2004 Jayco Eagle

Question

Question:

Looking for a bathroom vent cover for an 04 Jayco Eagle. Local dealership doesnt seem to stock them. It has a continuous hinge and the metal part that the arm attaches to is on the underneath, but to the side of the vent, not centered.

asked by: Kurt W

0

Expert Reply:

It sounds like the original vent lid on your 2004 Jayco Eagle could have been a custom part since all of the continuous hinge lids we sell, shown on the linked page, have their lid actuator channel centered on the lid. If you can find a manufacturer name on the vent you might be able to determine via internet search if the company still exists and whether parts are still available.

Instead I recommend replacing the entire vent with a new one for which you'll certainly have an easier time obtaining replacement parts well into the future.

If your bathroom vent measures the common 14 x 14-inch size like part # BBC-0530-04 you can refer to the other linked page to see complete vent assemblies, both manual ones like # MA00-03700 and powered types like # MA00-03801 that include both a 12V fan and powered lid operation.

We also offer a complete vent installation kit # 344270KITW that includes everything you'll need for a leak-free installation of your new vent. The linked video illustrates.

expert reply by: Adam R

0

Answer 1

The Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent #BVB0601-00 or just the Replacement Plastic Gear for Ventline Ventadome Trailer Roof Vent - Dome Motor Gear #BVD0121-00 is what you need to lift the dome.

view full answer...

Answer 2

The correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well as an installation video to assist.

view full answer...

Answer 3

The Ventline Northern Breeze Roof Vents have been discontinued. We do some parts you are looking for. The Replacement Operator w/ Knob and Screw for Ventline Vent with Metal Dome and Old-Style, Rounded Dome, #BV0115-04 and I suggest the the Vent…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 9

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please…

view full answer...

Answer 12

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...