Safety Chains for 2011 Forest Rive Flagstaff Mac Pop-Up Camper

Question

Question:

I am looking to replace the safety chains on my 2011 Forest River Flagstaff Mac pop-up camper. I believe the max gross weight is 3000 lbs, but am not sure what length/size I need. I have it in storage right now or I would measure and check it myself. Thanks for any help you can provide.

asked by: Steve

0

Expert Reply:

Based on my research your 2011 Forest Rive Flagstaff Mac pop-up camper does have a 3,000 lb GVWR like you mentioned. For safety chains a great option will be the Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 3,500 lbs # C80136.

I've added a link to a video review of these chains for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Since Toyota Camry's aren't meant for towing there isn't a confirmed fit for towing mirrors, but you could use a universal fit tow mirror like the K-Source Universal Towing Mirrors #KS69ZR. Note: Your mirror will need to be…

view full answer...

Answer 2

Since safety chains pivot underneath the trailer when making turns it's typically not a situation where a significant length of safety chain is needed to allow sharp turns to be made. Basically you'd want to measure the distance…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The main difference between the Redarc Liberty #RED24FR and Elite #RED44FR is the Elite allows you to switch from proportional braking to a user controlled mode which is more like a timed brake controller. The Elite also allows you to control up to 3…

view full answer...

Answer 5

I contacted the manufacturer and they were able to inform me that the 3/8" Quick Links #37201335 have a working load limit of 2,750 lbs. and a min. breaking limit of 6,875 lbs.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 12

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Safety Chains for 2011 Forest Rive Flagstaff Mac Pop-Up Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching