Replacement Step Gear Motor for Kwikee Series 25 RV Steps

Question

Question:

Good morning. I have installed a model 216945 on my RV and broke the small gear of the electric motor. Is it possible to buy only this gear without having to change the entire electric motor? Thank you.

asked by: Ariel

1

Helpful Expert Reply:

Since you have a Kwikee Series 25 step the motor replacement you need is the Lippert Components Kwikee Step Motor for 25 Series # LC369506. Just the gear is not available by itself.

expert reply by: Jameson C

1

Answer 1

I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part #LC22UD…

view full answer...

Answer 2

I spoke to my contact at Lippert Components (LCI) and they informed me that the Lippert Components Kwikee Revolution Step Control Module part #LC363980 is the correct replacement model for your Lippert Components Kwikee Revolution Steps pn…

view full answer...

Answer 3

The purple wire from the Lippert Components Kwikee Revolution Step Control Module #LC363980 is actually an optional wire that can be connected to a porch light so the light goes on whenever the steps are extended. The wire does not need to be…

view full answer...

Answer 4

The Replacement Motor for Lippert Electric Coach Step #LC301695 is what you need for your double steps. Your coach will use the coach steps with the large gear instead of the gear box with a rotating arm, so this is the correct motor for that…

view full answer...

Answer 5

Your outside power door steps are the Lippert brand. That part number is 5041647. I was able to find a replacement step on our website. The Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 27 Series - 29" Wide, part…

view full answer...

Answer 6

From what I could find with the number you provided, it looks like you have the Kwikee 25 series steps. If that is the case, the correct replacement motor would be the Replacement Motor for Kwikee 25 Series Electric RV Steps #LC369506. I am not 100%…

view full answer...

Answer 7

We have that part available in a kit. You will need the Replacement Motor with Gear and Table for Kwikee 24 and 25 Series item #LC369529. This kit includes the gear item #LC369354 that you referenced as well.

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Answer 12

It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…

view full answer...

Replacement Step Gear Motor for Kwikee Series 25 RV Steps

Product Page this Question was Asked From

Continue Researching