Universal Replacement Breakaway Battery Box for Trailer

Question

Question:

My battery size is 5.5 in long, 3 3/8 in wide, and 4in tall do you have abox to fit this battery, thanks.

asked by: Byron R

0

Expert Reply:

I do have an option for you but the replacement breakaway battery boxes that you were looking at like the Replacement Battery Box for Titan Gel Cell Breakaway Kit part # TN65117 are designed for specific breakaway batteries. Therefore, a better option for you would be to purchase a matching breakaway battery and box, like part # TK2023 and part # TK2051. The Curt Battery Box for Breakaway Kits part # C52090 may work for you as it measures 5-7/8" long x 3-1/2" wide x 5-3/8" tall but again our best option is to purchase a matching breakaway battery and box.

expert reply by: Conner L

0

Answer 1

The battery that fits in box #TN65117 measures 3.54 inches long, 2.76 inches wide, and 3.93 inches tall. Including the terminals it is 4.17 inches tall. This would be a bit too small for you based on the dimensions you listed. Instead take a look at…

view full answer...

Answer 2

The closest battery box to the 6x4x5 dimensions you are seeking is the Battery Box Vented - Marine 24 #DW03009 which has internal measurements of 10-3/4" long x 7" wide x 8-1/4" deep. The breakaway battery boxes like the Replacement…

view full answer...

Answer 3

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 4

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Universal Replacement Breakaway Battery Box for Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching