Is the Reese Semi-Custom 5th Wheel Installation Kit # RP30035-386 Available Without the Base Rails

Question

Question:

can i buy this kit rp300335-386 without the rails

asked by: Steve

0

Expert Reply:

The # RP30035-386, semi-custom installation kit is actually 2 kits in one. The separate brackets without the rails are # RP30439 and # RP58386. I have included links to the installation details for the complete kit for you.

expert reply by: Michael H

0

Answer 1

Reese Universal 5th Wheel Base Rail kit #RP30035 does require drilling since it is intended to fit a wide range of trucks. The Reese semi-custom base rail kit #RP30035-386 for the 2018 Ram 1500 includes the same base rails and hardware as part…

view full answer...

Answer 2

When installing the Reese Base Rails #RP30035 in your 2010 Dodge 1500, you will need to use the Reese Installation Kit for 5th Wheel Trailer Hitches #RP58386. This installation kit is designed to fit your 2010 Dodge 1500. If the installation…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 9

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 10

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Is the Reese Semi-Custom 5th Wheel Installation Kit # RP30035-386 Available Without the Base Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching