Replacement Keys for Deadbolt Trailer Lock

Question

Question:

I have a deadbolt trailer lock on my hitch and lost the key. The number/letters I found in the lock are CRS. Do you have replacement keys for this?

asked by: Jennifer Y

0

Expert Reply:

We offer etrailer.com locks but we don't have replacement keys for them.

Instead your better off cutting the lock you have and replacing it with a new one like # e98880.

expert reply by: Charles S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 6

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 7

To add a hitch with a 2" receiver to your 2024 Acura MDX, I recommend the etrailer item #e27KR. This hitch has a 900 lbs maximum tongue weight so it will work great with your Thule bike rack. I really like the way it installs too. The only…

view full answer...

Answer 8

The lock plug for the Rapid Podium Feet for Thule Crossbars #TH460R has been discontinued, unfortunately. So, your only option is to use their lock cores #TH450400 to secure your feet.

view full answer...

Answer 9

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 10

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Replacement Keys for Deadbolt Trailer Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching