How To Determine if 13 inch Trailer Wheel Can Have Baby Moon Cover

Question

Question:

I want to know how to choose the correct baby moon hub cap i have a 13 inch wheel with 3 bump

asked by: Boom G

0

Expert Reply:

Measure the diameter of the wheel you have where a baby moon cover would fit and then compare that to the picture I attached. If the diameter is 9-1/4 inch the part # AM90086 would fit. If you have something different let me know and I'll see what we can set you up with.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The baby moon covers part #AM90086 that you referenced are what you need. We had a customer with basically the same trailer as yours send in a picture confirming these fit for their 2018 Vintage Cruiser. I attached a picture for you to check out as…

view full answer...

Answer 2

If you measure the diameter of where the baby moon cover needs to install I can tell you if the #AM90086 would fit or not. If the diameter happens to be 9-1/4 inches then this cover would fit. You'd have to determine the size hole saw you'd…

view full answer...

Answer 3

We do have some towing mirrors that are confirmed to fit your 2016 Nissan Frontier, but unfortunately the CIPA Custom Towing Mirrors #CM10200 that you referenced are not compatible. Instead I recommend going with the CIPA Universal Fit Dual-View…

view full answer...

Answer 4

The measurement that you will want to take is the outer diameter of the inner ring and the outer diameter of the inner ring with one of the tabs (see photo). You will also want to count the bolt holes on the wheel and know the wheel diameter. The…

view full answer...

Answer 5

Based on the dimensions you mentioned needing for a baby moon cover the #AM90086 that you referenced would be the correct fit. I attached a review video for more info on it as well.

view full answer...

Answer 6

Your 2020 Gulf Stream Vintage Cruiser 19ERD has 14" 5 lug conventional wheels, and will need the Americana Baby Moon Trailer Wheel Center Cap #AM90086.

view full answer...

Answer 7

I was able to reach out to Americana and they informed me that the Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1 #AM90086 is roughly 3" deep, so they should work with your spindles- but it is going to be a tight squeeze.

view full answer...

Answer 8

I would be happy to help, but when I looked up your 2017 Gulf Stream Vintage Cruiser I was unable to confirm the wheel size. The Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel #AM90086 you were looking at fit 13" - 15"…

view full answer...

Answer 9

Yes, the Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1 #AM90086 will work with your 5-lug wheel pattern on your camper as long as the wheel sizes are 13 inches, 14 inches, or 15 inches.

view full answer...

Answer 10

We don't have anything quite like what you are describing for 16 inch wheels, but we do have some very similar options. We have the Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel #AM90086 which are 9-1/4 inches inside edge to…

view full answer...

Answer 11

I recommend replacing an entire ladder if it's damaged. You'll want to find a replacement based on the height. Such as the Stromberg Carlson #LA-401 that is 99-1/2 inches tall. They can be cut shorter to customize the length if needed.

view full answer...

Answer 12

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

How To Determine if 13 inch Trailer Wheel Can Have Baby Moon Cover

Product Page this Question was Asked From

Continue Researching