Replacement Cap for Ram 1000 Series Marine Jack

Question

Question:

I have a RAM marine jack on my trailer and the cap is missing and the jack said its the 1000 series, so will this cap fit the top of my jack?

asked by: Leonard

0

Expert Reply:

We do have the cap you need, which is the Replacement Cap for etrailer and Ram Swivel Marine Jacks - 1,000 lbs # MJ-1000B-CP, which is designed for the MJ-1000B Series jacks

The cap you referenced, the Replacement Cap for etrailer and Ram Swivel Marine Jacks - 1,500 lbs # MJ-1500B-CP is designed to work with a different model, the MJ-1500B Series jacks.

expert reply by: Kyle S

0

Answer 1

The Saris SuperClamp HD Bike Rack for 2 Bikes #SAR44VR can hold two bikes weighing up to 60 lbs. per bike and a maximum tire width of 4". This rack is also a wheel mount style which is typically the style needed for step though bikes. The…

view full answer...

Answer 2

Due to the weight of the two Lectric e-bikes the only compatible option we currently carry is the Lets Go Aero V-Lectric FAT PRO Bike Rack for 2 Electric Bikes #LGA77FR along with the 2-Bike Add-On for Lets Go Aero V-Lectric Electric Bike Rack…

view full answer...

Answer 3

Although the Silencer Pad for B&W Tow & Stow Multi-Ball Mounts #BWTS35020 is a great product to use, it really only helps to quiet the ball mount. If you are wanting to get something that helps to keep your ball mount from moving I…

view full answer...

Answer 4

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

We have one option that will work for you. The Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 #8-407-5UC3-EZ uses inner bearing #L68149 and outer bearing #LM67048 so it would work perfectly on your spindle.…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Replacement Cap for Ram 1000 Series Marine Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching