Will Replacement Aluminum Landing Gear Gearbox LC276602 Fit Atwood Landing Gear

Question

Question:

Will part LC276602 replace my atwood landing gear box.

asked by: Darren C

0

Expert Reply:

Yes, since the Replacement Aluminum Landing Gear Gearbox # LC276602 will fit many brands and models of landing gear including those from Atwood, Venture, Lippert, and Stromberg-Carlson it will work fine for your Atwood setup.

expert reply by: Adam R

0

Answer 1

I may have a solution for you, however Atwood is no longer producing landing gear products so specific replacement parts are getting harder and harder to find. We have had a few customers say that the Replacement Aluminum Gearbox #LG-179015 worked…

view full answer...

Answer 2

I talked to my tech contact at Progressive Dynamics. They tell me due to the design of the model 555 it is easier and more productive to do a complete swap and replace it with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart…

view full answer...

Answer 3

I reached out to Lippert and while they were unable to provide the gear ratio of the Lippert #LC276602 gearbox, they could confirm that the motors used with these are 3:1. Because of that, the gearbox should be somewhere around there, but again- they…

view full answer...

Answer 4

What you described does sound like a damaged gear box. This is pretty common for Venture landing gears like what you said you have and the correct solution is a new gear box which the part #LC276602 is the correct replacement for. For a replacement…

view full answer...

Answer 5

Lippert offers a replacement gear box which includes the collar, part #LC276602. This gearbox is identical to the Atwood #75054SP, except the Lippert version is manufactured of aluminum. At one time, Atwood had a metal gear box available but they no…

view full answer...

Answer 6

The Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White #FR92PR does feature a built-in condenser fan that will constantly run to try and eliminate most condensation that would come from the unit. My contact at Furrion said…

view full answer...

Answer 7

The 15,000 Btu Furrion Chill HE AC like the part #FR23PV does indeed have a start capacitor. In regard to the starting power needed, I reached out to Furrion, who told me the 15,000 Btu Chill AC's require 30 amps and 2,500 starting watts. So that…

view full answer...

Answer 8

The running power requirement for the Furrion Chill Replacement RV Air Conditioner part #FR86PR is 1,720 watts or 15.4 amps and the starting power requirement is 4,800 watts or 40 amps. That said, the Furrion Chill Replacement RV Air Conditioner has…

view full answer...

Answer 9

To keep your 6x12 enclosed trailer cool you could install the Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White #FR92PR. This unit has an industry leading BTU rating of 15,000 BTU's. It comes with a distribution box with…

view full answer...

Answer 10

It sounds like you need a new gearbox for your Atwood landing gear. I recommend the all-aluminum Lippert gearbox #LC276602 which works as a replacement for most brands of landing gear including Atwood, Lippert, and Stromberg-Carlson. The gearbox…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Will Replacement Aluminum Landing Gear Gearbox LC276602 Fit Atwood Landing Gear

Product Page this Question was Asked From

Continue Researching