Removing and Installing New Replacement Rubber Strap Kit for Yakima TimberLine Towers

Question

Question:

Can you direct me to instruct for installing replacement strap and bolt and nut in my Timberline tower??

asked by: Debra R

0

Expert Reply:

Basically you are going to need to remove the long Allen bolt I pointed out in the attached picture which will allow the strap to release. From there you'll just need to slide the barrel nut out of the metal end of the strap so that you can pull it out. Since written instructions for this aren't available this is easiest way to describe it. Once you remove the bolt though the rest of the removal process will become evident and you'd just need to reverse the process to install the new # 8880820.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 10

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C69VV does fit the 2024 Subaru Outback Wilderness. Ground clearance will be further reduced at the rear compared to other hitches for the Outback since it has a visible cross tube. Bumper removal is not required, but…

view full answer...

Answer 12

The trailer hitch that fits your 2024 Subaru Outback that is the easiest to install is the Curt Trailer Hitch Receiver #C69VV. Unlike other options, this hitch does not require removal of the rear bumper, which is why it isn't as difficult to put…

view full answer...

Removing and Installing New Replacement Rubber Strap Kit for Yakima TimberLine Towers

Product Page this Question was Asked From

Continue Researching