Tow Mirror Recommendation for 2010 Ford Explorer Sport Trac

Question

Question:

Im not seeing how the bottom bracket of the towing mirror will fit bottom of truck mirror which is angled

asked by: Mark E

1

Helpful Expert Reply:

I checked out the mirrors on the 2010 Ford Explorer Sport Trac and since the bottom of the mirror is angled in the best tow mirror is going to be the CIPA part # CM11980 which clips to the top of the mirror housing. Check out the picture I attached as well as the review video I attached for this mirror as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

There are currently no slide-on or slip-on towing mirrors for a 2017 Nissan Titan, and while I suppose anything's possible, there's no reason to think any will be added for this truck a number of years later. So if you need towing…

view full answer...

Answer 2

The most popular towing mirror option for your 2010 Ford Explorer Sport Trac is the #CM11980, which clips onto stock mirrors that have a lip or gap between the glass and mirror housing. I have included a link to a video review of this mirror for…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 6

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 7

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 8

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 9

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Tow Mirror Recommendation for 2010 Ford Explorer Sport Trac

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching