Does Curt Hitch # C13419 Fit New Model 2019 Ram 1500 or Classic Model

Question

Question:

This hitch is for the new 2019 Ram 1500, NOT the classic, correct?

asked by: Chuck

0

Expert Reply:

Correct, the Curt hitch part # C13419 that you referenced is for the new 2019 Ram 1500 and not for the classic model which is basically a carry over from the previous generation.

expert reply by: Jameson C

0

Answer 1

Yes, installing a frame mounted trailer hitch on a 2019 Ram 1500 is much better for heavy duty towing than the standard bumper mounted trailer hitch as it not only allows for a higher capacity but it also allows for more leveling towing. The…

view full answer...

Answer 2

I took a look in the owner's manual for a 2019 Ram 1500 and it states that the towing capacity with the bumper hitch is 5,000 lbs. If you don't already have one, the Curt Trailer Hitch Receiver part #C13419 is what I recommend which attaches…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

Hey Mike I checked with Westin and I can confirm that the Westin HDX Xtreme Nerf Bars item #W45XV do indeed fit the 2021 Ram 1500 Quad Cab. The instructions on their website say crew cab as well. This is pretty common amongst aftermarket part…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Does Curt Hitch # C13419 Fit New Model 2019 Ram 1500 or Classic Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching