Adapter Needed to Install Thule Hull-A-Port Kayak Carrier TH834 on WingBar Evo Roof Rack

Question

Question:

Hi, Last month we ordered roof rack and accessories for a 2016 4Runner to carry a SUP and Kayak. We are having an issue fitting the Thule Hill-A_Port TH834 the Thule WingBar Evo Crossbars TH711400. Do we need another part or accessory for these to work together? Thanks for your help.

asked by: Ryan C

0

Expert Reply:

Thank you for purchasing your Thule WingBar Evo roof rack, parts # TH711400 and # TH710401, and your Thule Hull-A-Port Kayak Carrier # TH834. To install the carrier on the roof rack you will need an additional component, Thule adapter part # THXADAPT11. This will let you complete the installation.

expert reply by: Adam R

0

Answer 1

Two sets of the Thule Hull-a-Port Aero #TH849000 would work with your existing roof rack. Either carrier would clamp to your WingBar Evo roof Rack This being said, have you looked at the Thule #TH890000 Compass kayak carrier? This option would allow…

view full answer...

Answer 2

In order to mount the Thule Hull-A-Port Kayak Carrier part #TH834 on Thule WingBar Evo Crossbars you need the Watersports Adapter for Aeroblade/Aeroblade Edge Bars part #THXADAPT11.

view full answer...

Answer 3

I spoke with my contact at Thule, and she did have a few suggestions for you to try. She said some people have had success retrieving broken keys using a paperclip. Try wiggling the key out using the paperclip along the ridged side of the key. I have…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...

Answer 6

To install the Thule Hull a Port Pro on Thule Aeroblade crossbars requires the use of the #THXADAPT11 that you mentioned. Otherwise it would not fit on the bars.

view full answer...

Answer 7

Yes! The Thule Hull-A-Port Kayak Carrier #TH834 comes with 2 metal clamps per each cradle that allow you to attach them to your round, square, elliptical, and factory crossbars. I went ahead and attached a photo of the clamps that come with the…

view full answer...

Answer 8

You will only need an adapter for the Thule Hull-a-Port #TH834 if you have the Thule WingBar Evo crossbars or the Thule Aeroblade crossbars. If you have those models of crossbars mounted on your Evo raised rail feet, you will need the Watersports…

view full answer...

Answer 9

There are 8 bolts included with the #THXADAPT3 like what the picture shows.

view full answer...

Answer 10

To install the Thule HullaPort part #TH834 on Thule Aeroblade crossbars you have to use the #THXADAPT11 which is designed for this conversion. I wish there was a different way but there isn't. Also I couldn't find you in our system by name or…

view full answer...

Answer 11

The adapter needed to install your Thule Hullaport part #TH834 on your aero shaped factory crossbars is the adapter part #THXADAPT11.

view full answer...

Answer 12

The bolts in part #THXADAPT3 are M6 sized, and work with the M6 Wing Nuts, part #753-0783 However, If you have the Hull-A-Port Pro then part #THXADAPT3 will simply replace your existing bolts, no problem. If you have the Hull-A-Port Pro, part…

view full answer...

Adapter Needed to Install Thule Hull-A-Port Kayak Carrier TH834 on WingBar Evo Roof Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching