How To Mount Thule Hull-A-Port Kayak Carrier 834 On Thule WingBar Evo Crossbars

Question

Question:

I recently purchased a wingbar evo 135 and hull a port 834 from etrailer. The hull a port 834 doesnt fit on the wingbar. The bolts are too short. What kayak carrier would fit on the wingbar evo 135. How do I make the exchange? Thank you,

asked by: Vicki F

1

Helpful Expert Reply:

In order to mount the Thule Hull-A-Port Kayak Carrier part # TH834 on Thule WingBar Evo Crossbars you need the Watersports Adapter for Aeroblade/Aeroblade Edge Bars part # THXADAPT11.

expert reply by: Conner L

1

Answer 1

To use the Yakima ShowDown #Y04081 you would need a roof rack where the crossbars extend past the legs at least 3-1/2". From what I can tell, the Mopar roof rack for your 2018 Jeep Grand Cherokee has crossbars that end where the legs fit. I…

view full answer...

Answer 2

Thank you for purchasing your Thule WingBar Evo roof rack, parts #TH711400 and #TH710401, and your Thule Hull-A-Port Kayak Carrier #TH834. To install the carrier on the roof rack you will need an additional component, Thule adapter part…

view full answer...

Answer 3

For a kayak carrier that is designed to fit the Thule Aeroblade Edge crossbars we have the Thule Hull-A-Port Aero #TH849000 which was designed to attach directly into the top channels of your bars and is the J-style you have currently which are…

view full answer...

Answer 4

I have a bunch of ways for you to get your Kayak up on top of your 2014 SylvanSport Go Trailer, but the Thule Hullavator isn't going to be an option because you will need to have 4 to 8 inches of bar overhang. Which, from what I can see there is…

view full answer...

Answer 5

The Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs part #TH898 will require two lock cores to secure, the Thule One-Key System Lock Cylinders part #TH450200. If you also want to secure the roof rack to the vehicle using the same…

view full answer...

Answer 6

The underside channels on your Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2, part #TH711520, are 9-3/4" long. The recommended crossbar length for your 2019 Jeep Cherokee is 53", part #TH711420. These crossbars will…

view full answer...

Answer 7

The adapter needed to install your Thule Hullaport part #TH834 on your aero shaped factory crossbars is the adapter part #THXADAPT11.

view full answer...

Answer 8

The bolts in part #THXADAPT3 are M6 sized, and work with the M6 Wing Nuts, part #753-0783 However, If you have the Hull-A-Port Pro then part #THXADAPT3 will simply replace your existing bolts, no problem. If you have the Hull-A-Port Pro, part…

view full answer...

Answer 9

There are 8 bolts included with the #THXADAPT3 like what the picture shows.

view full answer...

Answer 10

You will only need an adapter for the Thule Hull-a-Port #TH834 if you have the Thule WingBar Evo crossbars or the Thule Aeroblade crossbars. If you have those models of crossbars mounted on your Evo raised rail feet, you will need the Watersports…

view full answer...

Answer 11

Yes! The Thule Hull-A-Port Kayak Carrier #TH834 comes with 2 metal clamps per each cradle that allow you to attach them to your round, square, elliptical, and factory crossbars. I went ahead and attached a photo of the clamps that come with the…

view full answer...

Answer 12

To install the Thule HullaPort part #TH834 on Thule Aeroblade crossbars you have to use the #THXADAPT11 which is designed for this conversion. I wish there was a different way but there isn't. Also I couldn't find you in our system by name or…

view full answer...

How To Mount Thule Hull-A-Port Kayak Carrier 834 On Thule WingBar Evo Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching