What Does Thule Hitching Post Pro Part # TH934XTR Weigh

Question

Question:

What is the weight of this rack?

asked by: Ann

0

Expert Reply:

The Thule Hitching Post Pro Part # TH934XTR that you referenced weighs a total of 40 lbs. The weight capacity of the rack is then 35 lbs per bike.

I attached a review video for the rack for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

When determine if you can fully open swing-out doors on your 2022 ProMaster 3500 with the Yakima EXO #Y34ZR, it really depends on how far your doors swing when in the open position. While the 90-degree swing has not been tested spcificially on a 2022…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 5

The Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier #Y34ZR will restrict the passenger side door on your 2024 Entegra Expanse. When the arm swings out it will be sitting at that corner of the vehicle which means the door will be able to…

view full answer...

Answer 6

I confirmed with EcoHitch and their Trailer Hitch Receiver #EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option.

view full answer...

Answer 7

Per the linked installation instructions which you can click below the torque is 86 ft-lbs for the 12mm hardware when installing the etrailer Trailer Hitch Receiver #e75ZR on the 2023 Toyota Highlander.

view full answer...

Answer 8

Both of these Thule racks will do an excellent job of safely and economically hauling four bikes (assuming you aren't using a Class I hitch, which has a manufacturer recommended limit of hauling two bikes at a time). The Camber #TH9056 is lighter…

view full answer...

Answer 9

Yes, the Curt cargo carrier 18153 will fit the Curt Trailer Hitch Receiver #C26VV on your 2024 Grand Highlander. The 2" shank matches the 2" receiver on the hitch.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

What Does Thule Hitching Post Pro Part # TH934XTR Weigh

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching