Permanent Roof Rack for 2018 Honda HR-V with Naked Roof

Question

Question:

Hi folks, I bought a new 2018 Honda HRV LX thinking I could just buy the factory roof rails and attach them as I did on my 2017 Honda Pilot LX. But, Honda did not provide the mounting points on the HRV LX. What!? So, I do not want a clamp style roof rack but rather a permanently mounted style. I also would very much prefer to minimize the number of holes drilled into the roof and preferably limit them to the ditch area and not the main roof. From my research, I figure I will have to combine manufactures products to make it work. It doesnt appear that Yakima or Thule offer ditch mount brackets, only tracks. So, using one of the Rhino Rack ditch mount brackets, combined with the Yakima PlusNuts better than RivNuts or Rivets mount the brackets in my cars ditch. Followed by Rhino Rack towers to align with the bracket holes. I would prefer the more common Yakima towers but, dont know if their holes line up with the Rhino Rack bracket holes. Does this all sound feasable? Or, can you recommend a better option ? Oh, and if I ordered these parts and find this approach wont work, could I return them, unused, at no cost? Thanks for ANY help or advice you may be able to provide.

asked by: Mike M

1

Helpful Expert Reply:

You are correct that there isn't a roof rack available that's specifically designed to permanently install onto the roof of your 2018 Honda HR-V but we certainly have the parts needed to make this work. Customers usually don't want to drill into the roof of their vehicle so this is a bit of a unique case!

For the roof rack I recommend sticking with one brand for all the parts since they have been tested together and you can be sure that they will not only fit but also provide you with the listed capacity. Mixing parts from different manufactures will essentially give you an unknown capacity since all of the components haven't been tested and rated for use together.

Starting with the ditch brackets the Rhino-Rack # RRQMFK08 is a great option. This comes with two brackets and 6 rivets so you will need to order two sets to give you all four corners. A rivet gun is required for installation.

Then to pair with the brackets the Rhino-Rack Quick Mount Legs # RRRLT600 will work perfectly. These are designed to mount to the above-mentioned brackets and all 4 legs are included.

Then for the crossbars themselves I recommend the Rhino-Rack 46" Long # RRVA118B-2.

This will give you a complete and permanent roof rack for your HR-V.

expert reply by: Chris R

1

Answer 1

I do have a way for us to get the Yakima GrandTour Lo Rooftop Cargo Box #Y46FR on top of your 2015 Toyota 4Runner, but since the OEM crossbars are really close to the roof of your vehicle we have only found that the Thule Sidekick Roof Mounted Cargo…

view full answer...

Answer 2

The Thule Motion XT, part #TH629806 is a recommended fit for your 2016 Toyota 4Runner by Thule, however, you can verify the fit prior to purchase by taking a quick measurement. If your crossbars are adjustable, move them as far forward as possible.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 10

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 11

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...

Answer 12

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...