Rhino Rack Roof Rack Review - 2018 Honda CR-V Video

There is a really good option for a roof rack that is not difficult to install and will fit perfectly on your 2017 Honda CR-V with a naked roof, and I highly recommend going with Rhino-Rack. I really like the Rhino-Rack option because not only is…

For your 2022 Honda CR-V with a bare roof, the best roof rack is going to be from Thule, and there are a number of reasons for that. The rack's WingBar Evo crossbars are 53 inches long, which is important because they are longer than other…

We definitely have a roof rack available for your 2022 Honda CR-V Hybrid. With your vehicle having a naked roof, it will not cause any issues either. With that being said, the Rhino Rack Rhino Rack Vortex Aero Bar - Aero Roof Rack will be an…

The connection point for the 4-way tow harness is located behind the driver's-side interior trim panel in your rear cargo area. The ModuLite plugs into the factory wiring harness beneath your dash, on the driver's side. Once you've…

I'm assuming that you're needing to know so you can choose the correct wiring harness, correct? You could call your Lexus dealer and give them your VIN, and they should be able to tell you how your RX350 is equipped. Or, you could remove the…

I talked to Rhino Rack in regard to you upgrading your 54" Vortex Crossbars #RRVA137B-2 to the 59" Vortex Aero Crossbars #RRVA150B-2. I was told that you need to install the legs about 63.5mm (2-1/2") from the strip. You could also…

Correct, there are 11.8 inches of adjustment under each side of the crossbar for you to adjust the feet in on the Rhino-Rack Vortex Aero Crossbars like part #RRVA150B-2. Therefore, the 59 inch bar will work great for two mounting points 54"…

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

It looks like the Harbor Freight Folding Trailers use a Jeep style fender so if that's the case then the best option we have for replacement is the Single Axle Trailer Fender part #HP99VR which will work just fine with 4.80x12 tires. That said,…

The Thule Hullavator Pro Kayak Carrier part #TH898 comes with the attachments that you will need for the channels/tracks on your Rhino-Rack Vortex Aero Crossbar so you will not need anything else for this. However, the Hullavator requires that you…

If there was a way to lighten your kayak by 5 lbs the Thule Hullavator part #TH898 that you referenced would work great but it has a 75 lb weight capacity. This does fit the Rhino Rack Vortex Aero roof racks though like the part #RRVA137B-2,…

First you will need to start with a roof rack that fits your 2018 Honda HR-V with a naked roof. For that you'd want the Rhino Rack Vortex rack part #RRVA118B-2 #RRRLKVA #DK454 which I really like because it gives you a higher quality roof rack at…