Does the Progressive Dynamics 4500 Series Inteli-Power Converter Need its Own Ground

Question

Question:

does this converter need its own ground

asked by: Timothy J

0

Expert Reply:

Yes, the Progressive Dynamics 4500 Series Inteli-Power Converter # PD4575K18LS8 will need its own ground.

expert reply by: Jon G

0

Answer 1

Since all you are needing to replace is the converter for your Progressive Dynamics PD4575K18L, you will need the Replacement Lithium Converter for Progressive Dynamics 4500 Series item #PD4575LICSV. This converter will replace your 75 amp…

view full answer...

Answer 2

I took a look at the owner's manual for the Progressive Dynamics RV Power Control Center #PD4575K18LS8 and found what you are looking at. The lithium/lead acid switch is a new feature added to the 4500 series converter chargers so my guess is…

view full answer...

Answer 3

The Progressive Dynamics RV Power Control Center, #PD4590K18LS8 is an AC/DC distribution panel and converter charger. The converter/charger operates at up to 90 amps and works with lithium-ion, flooded lead acid, AGM, and gel batteries, make the…

view full answer...

Answer 4

The Progressive Dynamics 4500 Series Inteli-Power Converter #PD4575K18LS8 that you referenced does not come with breakers actually. I attached a picture that has the breaker info for the unit though. You'll need to supply your own. I attached a…

view full answer...

Answer 5

I reached out to my contact at Progressive Dynamics who makes the #PD4575K18LS8 you have installed in your Montana 5th wheel trailer and there is a few different things you will need to check to find what is causing your DC trailer outlets to not…

view full answer...

Answer 6

Realistically you should be using a 50A transfer switch like the: -Progressive Dynamics Transfer Switch #PD52. As using a 30A transfer switch would leave one leg of your panel unhooked, which isn't ideal. However, with that being said you can use…

view full answer...

Answer 7

10 gauge wire like #10-1-1 for all of the main power circuits for the #PD4575K18LS8 would be great. When in doubt though 8 gauge will work great too. Especially when making longer runs. Also I recommend having a qualified electrician at least look…

view full answer...

Answer 8

Regarding the Progressive Dynamics #PD52 Transfer Switch, you should follow the directions provided in the installation guide, provided in the link below, and available on the product description page. If you are not familiar with electrical circuits…

view full answer...

Answer 9

Since you'll be pulling 50 amp service you'll want the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V Item #PD52. This transfer switch will automatically switch over from shore power to generator power and back as…

view full answer...

Answer 10

Yes, since the Progressive Dynamics Transfer Switch #PD52 is 120 and 240 volt compatible this will work fine with 30 amp as well as 50 amp. This 50 Amp transfer switch will allow you to hook up the 30 Amp shore power to the HOT 1 connection in the…

view full answer...

Answer 11

A transfer switch is only going to have two receptacles to accept power from so you wouldn't be able to connect all of your systems together, but I do have a solution for you. You would need to use a 50 amp transfer switch like the Progressive…

view full answer...

Answer 12

Even though the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4575K18LS8 is designed to use with 50-amp shore power, I confirmed with my tech at Progressive Dynamics that you can use the panel with a…

view full answer...