Mounting Hole Spacing of Ultimate Tuf Combo License Plate Frame CR62510

Question

Question:

What is the distance in inches between the mounting holes on this product? I have a 2018 Ram 1500 Crew Cab.

asked by: Torres

0

Expert Reply:

Mounting hole spacing for the Ultimate Tuf Combo License Plate Frame # CR62510 is 7 x 4-5/8-inches on hole centers as shown in the linked photo. This plate cover includes mounting nuts/bolts and decorative bolt head covers that match the frame. Both standard and metric hardware is included.

expert reply by: Adam R

0

click to enlarge

Answer 1

The Trailer License Plate Mount Bracket, #LP15SB, can be used as an exact replacement for the following parts: Uni Bond #LH1000Z Wesbar #3203 Peterson #B428-09 Bargman #30-72-100 I went out to the warehouse and took some measurements of the bracket…

view full answer...

Answer 2

In order to use the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-508 if you have the 5-1/2' bed, part #TH43002XT-501 if you have the 6-1/2' bed, or part #TH43003XT-000 if you have the 8' bed on your 2019 Ford F-150 you…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Mounting Hole Spacing of Ultimate Tuf Combo License Plate Frame CR62510

Product Page this Question was Asked From

Continue Researching