Does The Thule Sup Taxi Paddleboard Fit The Bars Of The Yakima Outdoorsman 300

Question

Question:

Will the Thule Sup Taxi Paddleboard Carrier fit on a Yakima Outdoorsman 300 truck rack?

asked by: Christine L

0

Expert Reply:

Yes, the Thule Sup Taxi Paddleboard carrier part # TH810001 is compatible with the round bars of the Yakima Outdoorsman 300 Series.

The Yakima Outdoorsman 300 ladder rack comes in 3 different cross bar lengths. If you have a full size truck you can use part # Y01137-Y00410 with 66" cross bars, part # Y01137-Y00411 for the 78" cross bars or part # Y01137-Y00409 for 58" cross bars.

If you have a compact truck you can use part # Y01136-Y00410 with 66" cross bars or part # Y01136-Y00409 for the 58" cross bars.

expert reply by: Heather A

0

Answer 1

The Tie-Down Kit for Truck Hero Elevate Rack System part #TH52FR will be a great way to add tie down points to your Retrax Pro Xr Tonneau Cover like part #RTT-80383. These are designed to be slid into the track and fastened down to provide the…

view full answer...

Answer 2

I do have an option for you but there isn't really any tie-down kits designed specifically for the Rextrax XR Tonneau Covers. That said, we have heard back from customers that the Tie-Down Kit for TruXedo Elevate Rack System part #TH52FR is…

view full answer...

Answer 3

Yes the Thule SUP Taxi part #TH810001 is a fit for the Yakima Overhaul HD bars like the #Y01152-57 that fits your 2020 Jeep Gladiator.

view full answer...

Answer 4

You would have to remove the antenna of your 2016 Jeep Cherokee to install a paddleboard carrier like the Thule SUP Taxi Stand-Up Paddleboard Carrier #TH810001 which would work well. Since there are no paddleboard carriers that hold the boards on…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

The best Timbren kit for your 2024 Toyota Tundra is the Timbren Suspension Enhancement System #T45MR rated for 6K. The Off-Road kit and the 7K kit will have the Timbren bumpers engaging a bit quicker than what you'll need with standard vehicle…

view full answer...

Does The Thule Sup Taxi Paddleboard Fit The Bars Of The Yakima Outdoorsman 300

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching