Hidden Trailer Hitch for 1994 Chevy C/K that Fits Behind Roll Pan Bumper

Question

Question:

looking for a hidden hitch i want to install a roll pan on my truck and need a hitch for 10,000 pound trailer 1000 pound tongue weight

asked by: David L

0

Expert Reply:

We have hitches designed to fit behind a roll pan bumper installed on your 1994 Chevy C/K but the capacity is about half what you mentioned. For that we have the Curt # 13942 which has a towing capacity of 5,000 lbs trailer weight.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I went out to the warehouse to take some measurements of Curt trailer hitch #C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the…

view full answer...

Answer 3

From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second…

view full answer...

Answer 4

As we have not had a 1973 Ford F-100 in our shop to test fit the available receivers I can only give you the measurements from one of our receivers so that you can see where it will sit on your truck. The Curt Trailer Hitch Receiver #C14082 is…

view full answer...

Answer 5

We don't have any hitches that are confirmed to fit on the CUCV M1008 military truck, but from what I was able to find out is that it's a version of the Chevy C/K series trucks that were manufactured for civilian use. You may be able to use…

view full answer...

Answer 6

The measurement from the top of the mounting bracket down to the top of the receiver tube measures 5 inches. Curt trailer hitch #C14082 is a custom fit hitch designed to fit the following vehicles: 1973 - 2000 Chevrolet C/K Series Pickup Cab and…

view full answer...

Answer 7

The hitch tube of the Curt Hitch part #13028 is going to be right at 4-1/2 inches below the frame it connects to and the opening would then be right at 7 inches forward of the rear most mounting hole. You'd have to compare that to your vehicle to…

view full answer...

Answer 8

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

view full answer...

Hidden Trailer Hitch for 1994 Chevy C/K that Fits Behind Roll Pan Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching