Is There a Kayak Carrier that Fits on Adarac Aluminum Series Crossbars

Question

Question:

I am wondering if there area any kayak attachments that work with the adarac aluminum series not sure if that mounting channel is an industry standard or specific to adarac. I am looking for a carrier that will hold the kayak flat not tilted on its side similar to the thule glide and set kayak holders from what I am seeing thule does not offer anything that will work with the ladder rack. Thanks.

asked by: Tim H

0

Expert Reply:

I have a solution that will allow you to carry a kayak carrier on the 1-1/2 inch square crossbars of the Adarac Aluminum Series ladder racks. The Yakima HullyRoller Kayak Carrier part # Y04035 can be installed on crossbars up to 1-1/2 inches in height if you use the Universal MightyMounts # Y03590.

The HullyRoller allows kayaks to sit flat on the crossbars as well.

expert reply by: Jameson C

0

Answer 1

Your best option for carrying an 83lb kayak on your Adarac ladder rack is to use etrailer J-Style Kayak Carrier - Folding - Universal Mount #e98878. This will fit around the square bars on your ladder rack and provide a nice J-style cradle for your…

view full answer...

Answer 2

In order to install the Rhino-Rack J-Style Kayak Carrier #S512 on your Adarac Pro Series Custom Truck Bed Ladder Rack #A4000964 you're going to need the Crossbar Adapters #KC-FK8. This allows you to install the kayak carrier using the top channel…

view full answer...

Answer 3

The Thule The Stacker - Rooftop Multi-Kayak Carrier part #TH830 will work on the Adarac Aluminum Series Custom Truck Bed Ladder Rack using the Thule Xadapt3 Xsporter Load Bar Adapter for the Hullaport part #THXADAPT3. These longer bolts work to get…

view full answer...

Answer 4

The Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs #A4000964 is an excellent rack for transporting 4 kayaks on your 2013 Ford F-150 with the 5-1/2' bed. The most economical way to safely haul your 4 kayaks is to use 2 of the…

view full answer...

Answer 5

The Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style #TH890000 will actually fit Adarac ladder racks such as #A4000965 that you referenced. You do not need any adapter or conversion kit as this kayak carrier will simply clamp onto the…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR. The…

view full answer...

Answer 8

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 9

In order to mount two kayaks on a 2020 Subaru Outback you will need to haul them both on their side as this is the only way to be able to fit both on the factory roof rack. The best way to haul two kayaks on their side is with a j-style carrier as…

view full answer...

Answer 10

Yes, we have the Thule Wingbar Evo roof rack part numbers #TH711520 and #TH33ZR that fits your 2023 Jeep Wrangler Unlimited that has the one touch roof. The Wingbars are the quietest and most aerodynamic bars out there so we recommend them highly.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...