Wheel Net Recommendation to Fit Tire Size 27x9x12 on Honda Pioneer 1000 UTV

Question

Question:

Info says it will fit a 14foot to 15foot tire. Is this referring to the outside diameter of the tire or talking about the rim diameter. More specifically will this fit properly on a 27x9x12 tire on my Honda Pioneer 1000 UTV.

asked by: Daniel H

0

Expert Reply:

The 14 inch to 15 inch diameter that the Kinedyne Wheel Net # 910 fits is referring to the diameter of the wheel and not the diameter of the tire. For your UTV tire size of 27x9x12 you'd want a ProGrip Adjustable Wheel Net with Ratchet # 317-18900 which will easily fit your tire size as it fits tire diameters of up to 33 inches and 12-1/2 inches in width. It also has a capacity of 5,500 lbs as well.

expert reply by: Jameson C

0

Answer 1

I have a couple options for you as the SmartStraps Ratcheting Wheel Net with Snap Hooks #348851 will not fit your 33&amp;quot; tire. The ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 are designed to fit a tire up to…

view full answer...

Answer 2

According to ProGrip, the strap on the ratchet side of the #317-18900 adjusts out to 12&amp;#39; long. The other end with the fixed length strap is 21-1/2&amp;quot; long. You won&amp;#39;t have any issues using this on your…

view full answer...

Answer 3

We have the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs #BDW20362 which is very similar to a wheel net and is compatible with diameters up to 37 inches. It is 9 inches wide so it…

view full answer...

Answer 4

Yes, the ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 will definitely work with your Can Am Maverick Sport X rc. The ProGrip fits tires that are up to 33 inches in diameter and 12-1/2 inches wide, and your Maverick Sport has…

view full answer...

Answer 5

For your 2022 Honda Passport LE, I recommend the Tekonsha Prodigy P3 #90195. This is a great all around controller. Large accessible buttons and an LCD display make this very easy to use, even for first time towers. This will also be very easy to…

view full answer...

Answer 6

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 7

Since you are wanting the most rust proof E-Track I recommend the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 4&amp;#39; Long #e95VR as its galvanized finish will be the best for rust prevention, and will hold up fine even…

view full answer...

Answer 8

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…

view full answer...

Answer 9

In regards to the Ram Gooseneck Coupler part #GCSQ-25008, the main things you need to know are the size and weight capacity. The outer tube which gets welded to the tongue of the trailer is 4-1/2&amp;quot; x 4-1/2&amp;quot;. The inner…

view full answer...

Answer 10

Typically people will let the breakaway battery run the breakaway system and then would use the accessory battery to power the interior lights etc. This tends to work the best since your breakaway battery needs to always be charged and interior…

view full answer...

Answer 11

Wiring in the parking light diode #RM-690 is easy. All you have to do is locate the wire leading to the parking light bulb. Cut the wire and insert the diode in-line with the wiring. The IN side will be the part of the wire that leads to the front…

view full answer...

Wheel Net Recommendation to Fit Tire Size 27x9x12 on Honda Pioneer 1000 UTV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching