Can Rear Fascia Reinstall on 2019 GMC Acadia After Install of Draw Tite Hitch

Question

Question:

Is there a way to reinstall the fascia support Bracket or a custom piece to replace it?

asked by: Edgar C

0

Expert Reply:

The lower fascia piece on your 2019 GMC Acadia can be reinstalled after installing the Draw Tite hitch part # 76023 but you will need to trim it slightly to allow it to fit into place properly.

I've attached a picture from the install details to show the cut out. The install details are also linked for you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have two hitch options for your 2020 GMC Acadia. We have the more hidden but harder to install Draw Tite part #76023 and the easier to install but more visible Curt #C13293. It really comes down to what you value the most. If you want a shorter…

view full answer...

Answer 2

The Curt Class III Trailer Hitch Receiver #C13293 is indeed a confirmed fit for your new 2020 GMC Acadia and it's going to line right up to existing holes in the vehicle's frame rails for a bolt-on (no-drill) installation. The only minor…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver part #C13293 and the Draw-Tite Trailer Hitch Receiver part #76023 are both excellent options for a 2020 GMC Acadia. That said, there are some distinct differences. The Curt hitch (see photo one) hangs below the rear…

view full answer...

Answer 4

I think I have forgotten more about hitches than Amazon will ever know! Draw-Tite trailer hitch #76023 and Curt trailer hitch #C13293 will both fit your 2017 GMC Acadia. I have linked a video showing an example installation of the Draw-Tite hitch on…

view full answer...

Answer 5

Congrats! Glad the install of the Draw Tite hitch part #76023 went smoothly and you found an easier way to complete the install! Thanks for passing on the tips you discovered to make the install easier as well. Hopefully it helps future customers in…

view full answer...

Answer 6

The trailer hitch options for a 2020 GMC Acadia are the Curt Trailer Hitch Receiver part #C13293 (see photo one) and the Draw-Tite Max-Frame Trailer Hitch Receiver part #76023 (see photo two). The trailer hitches are both bolt-on options and have…

view full answer...

Answer 7

As it is the fascia door on your 2018 GMC Acadia cannot be reinstalled once Draw-Tite trailer hitch #76023 is in place. It can be trimmed and put back on, see instructions link, but not will not fit unless it is trimmed. Basically the door is trimmed…

view full answer...

Answer 8

Yes, the Curt wiring harness #C56325 does fit your 2020 GMC Acadia. You can verify by finding the connector behind your Acadia's muffler. If you don't already have a trailer hitch I recommend the Curt #C13293 because it's a much easier…

view full answer...

Answer 9

Did you make all of the modifications to the rear fascia that are outlined in the install instructions of the 76023?

view full answer...

Answer 10

From the information I can find I believe your 2019 GMC Acadia will have the wiring routed back towards the rear of your vehicle whether you have the factory tow package or not (see attached photo). If you check up under the rear bumper of your…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can Rear Fascia Reinstall on 2019 GMC Acadia After Install of Draw Tite Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching