Can 8" Diameter Buyers Products Conduit Carrier Kit Be Used with 8" PVC or Schedule 40 PVC Pipe

Question

Question:

Can this kit to be used with 8inch sewer and drain pvc pipe or 8schedule 40 pvc pipe

asked by: Hugh S

0

Expert Reply:

Yes, the 8" Diameter Buyers Products Conduit Carrier Kit # 337CC800 that you referenced is actually made for 8" diameter PVC pipe as well as schedule 40 or 80 like you referenced.

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

The u-bolt that comes in the Buyers Products Conduit Carrier Kit - 8" Diameter #337CC800 is 10mm in diameter and uses a 10mm hex bolt.

view full answer...

Answer 2

I may have a solution for you, but the caps are not sold individually. However you can purchase the kit with part #337CC600, which is the 6" diameter.

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 10

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Can 8" Diameter Buyers Products Conduit Carrier Kit Be Used with 8" PVC or Schedule 40 PVC Pipe

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching