Troubleshooting Check Trailer Brake Wiring On Truck Dash
Question:
Where is the trailer break wiring located at . I get a message on my dad saying check trailer brake wiring where is that located that if you could help me please Thank you
asked by: Alex
0
Expert Reply:
It's going to be the brake output circuit of the 7-way you have on your truck. This is the pin in the 5:00 position. Most of the time when there's an issue on this circuit it's due to corrosion on the pins so you might try cleaning this first. If that does not fix it look further on the trailer's wiring of this circuit to see if you can find any obvious signs of shorts and fix as needed.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
- Q&A: Similar Tire Size Replacement for 7.50x16 That Is Radial Construction
- Article: Trailer Maintenance Schedule
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Which Replacement Electric Brakes For 10" Drum Stamped KA90831
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Q&A: Replacement For 8,000 lb A-Frame Trailer Coupler With 2-5/16 Inch Hitch Ball
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?