Do I Need HydraStar Electric Over Hydraulic Actuator Adapter Module For Newer Model Ford

Question

Question:

Is this adapter required for 2019 Ford integrated brake controller?

asked by: Rick V

0

Expert Reply:

If you are using a HydraStar Electric Over Hydraulic Actuator For Disc Brakes like part # HBA16 in the 2019 Ford with integrated brake controller the adapter part # HBA-CAM is not needed. There is really only issues with compatibility using a Hydrastar Actuator in older generation Ford trucks, usually between 2007-2009. I confirmed with HydraStar that Ford's after 2009 have integrated brake controlling systems that are compatible with the Hydrastar Actuators.

expert reply by: Heather A

0

Answer 1

view full answer...

Answer 2

I always recommend choosing disc brakes over drum brakes if you have the option. Disc brakes will provide more stopping power, less fade and require less maintenance because they have fewer moving parts. If your 5th wheel trailer currently has…

view full answer...

Answer 3

I have the perfect Disc Brake Conversion kit for your 8K Lippert Axle! First you will need The Kodiak Disc Brake Kit #K2HR89DD. This kit has a cast iron construction and resists corrosion with its Dacromet plating. The kit has a 8 on 6-1/2 inch…

view full answer...

Answer 4

For your 8,000 lb Lippert trailer axle the Dexter 8k kit from Kodiak part #K2HR89DD would fit and work great. The AL KO setups are a little different so that would not be the route for you to go. Since this isn't an ABS system there isn't a…

view full answer...

Answer 5

You can use the Kodiak Ceramic Brake Pads #K250CP-SS to replace the worn pads on your Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers #HYD54FR.

view full answer...

Answer 6

Converting a 5th wheel trailer from electric drum brakes to electric-over-hydraulic disc brakes will require a couple of items: the disc brake kit of hub/rotors and calipers, a brake line kit, an electric-over-hydraulic actuator, a breakaway kit and…

view full answer...

Answer 7

We prefer the Hydrastar Actuator part #HBA16 as it is the most reliable and works the best. This would be the best option for your trailer. We have the least amount of issues with this actuator and it is the one our installers like the most so we…

view full answer...

Answer 8

Let me start by stating the first step to finding the best option for your situation is to know your particular pin box style/number. The pin box number will be listed on a sticker on the pin box or stamped on the king pin. For example, if you have a…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Do I Need HydraStar Electric Over Hydraulic Actuator Adapter Module For Newer Model Ford

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching