How to Pick Out Replacement Hubs for Karavan PWC Trailer
Question:
My hubs are completely shot and I am looking to replace them. I know they are 5 Lug and a 12” rim I believe 12x4.80 tire. Can you please assist me with the proper Hub for this trailer?
asked by: Ruben A
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Brake Hub/Rotors UFP 9.75 rotors with 10 demaxx ?
- Q&A: Replacement Hub Assemblies For 24 Foot Pontoon Boat Trailer
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Pintle Lock for Gen-Y Adjustable Ball Mounts w/ 2" Receivers
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Brake Controller
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Hub/Bearing Kit for Karavan Trailer with 2,200 lb Axle
- Q&A: How to Pick Out Replacement Hub for Karavan Trailer
- Q&A: Picking Out Replacement Trailer Hub for 2006 Karavan 1250
- Q&A: Determining Which Replacement Wheel Bearings, Races and Seals for 2006 Karavan WCE-1250/900-46
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: How to Determine Tire/Wheel Diameter
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - DL21792 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Video: Trailer Wheel Measurements
- Search Results: l44643 bearing kit
- Search Results: 8x3.75 wheel
- Search Results: akihub~545~2~ez~2k
- Search Results: karavan trailer parts
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: trailer brake controller
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer lights