Right Stop/Turn Pin on 4-Way for Ford Fusion Active All the Time

Question:

Had this kit installed on my 2013 Ford Fusion SE and it is not functioning correctly. When checked with a 4 flat tester, the right turn signal shows constant power, and does not blink when turn signal is engaged. The left turn signal is very dim, and no lights activate when brakes are pressed. When I looked around online the only person I found having a similar problem had a Curt wiring kit that was meant for a titanium model Fusion. I would like to know if this kid is designed to work for the 2013 Ford Fusion SE and if not what kit will?

asked by: Joseph

Expert Reply:

I am sorry to hear about the issues you are having with your wiring harness. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56351 is correct for a 2013 Ford Fusion SE. If the right stop/turn signal pin on the 4-way has constant power without either signal active then there is an issue with the converter box and the unit will need to be replaced. For replacement, I recommend the T-One Vehicle Wiring Harness part # 118574. The reason for this is that these are the most reliable trailer wiring harnesses we have come to find.

I have attached an install video for you as well. The 12 volt power wire you have ran already can be reused.

expert reply by: Conner L