Will Curt Echo Work with 2015 Ford F-150 with 7-Way Trailer Connector

Question

Question:

Will this connector work with a 2015 Ford F1 50 with a 7 Round Plug without additional wiring ..?

asked by: William M

0

Expert Reply:

Yes, the Curt Echo brake controller, part # C51180, works on any vehicle that has a fully functioning 7-way trailer connector. The only thing else you need is a compatible smartphone or tablet to communicate with the Echo.

expert reply by: Charles S

0

Answer 1

I have a few things for you to check when it comes to not being able to pair your iPhone with the Curt Echo #C51180. The first thing to do is make sure that you're pairing your phone with the Echo through the app. If you paired it through…

view full answer...

Answer 2

Unless Curt comes up with an update for the controller there isn't a way we can help aside from having you continue to work with them. Our only real solution is remove the #C79DR and instead use the removable version #C51180 which plugs into the…

view full answer...

Answer 3

So, I'm going to go ahead and rip the Band-Aid off right here - your dealership is very wrong and your 2017 Ford F-150 can absolutely have a trailer brake controller installed. They are wrong about not being able to add one and wrong about there…

view full answer...

Answer 4

Is it possible you have the max output and/or aggressiveness settings too low on your Curt Echo #C51180 and that's why it doesn't feel like the brakes are working? If the trailer wasn't connected or if there was a short on the wiring that…

view full answer...

Answer 5

The brake controller I highly recommend for your 2018 Ford F-150 is the Curt Echo Mobile Trailer Brake Controller #C51180 because it is the easiest brake controller to use with your truck. The Curt Echo will simply plug into the 7-way on the back of…

view full answer...

Answer 6

The Curt Echo Wireless Trailer Brake Controller #C51180 is a little complicated to use on the 2018+ Ford F-150's. To get the Echo to connect you will need to ensure that your 2020 Ford F-150 is in tow/haul mode. Then the truck is going to need to…

view full answer...

Answer 7

On your 2018 Ford F-150 The Curt Echo #C51180 requires tow / haul mode activation and / or load detection on 7-way before the +12V output is activated on the 7-way connector. Activate tow mode and connect trailer before attempting Bluetooth…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Will Curt Echo Work with 2015 Ford F-150 with 7-Way Trailer Connector

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching