Will G2 Bed Rail Clamps Work with Old Xsporter 422xt?

Question

Question:

Will this clamp work as a replacement for an older xsporter 422xt. I’m replacing my g2 and still have the clamps? Thanks

asked by: Matthew G

0

Expert Reply:

The Replacement Modular Clamp # PT-27064 is not a fit for the old Xsporter racks. Instead you will need the Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks # 8523159001 which is confirmed to fit the old Xsporter 422xt.

expert reply by: Jason S

0

Answer 1

I reached out to my contact at Thule and was able to confirm that the Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks - Qty 1, #8523159001, are a fit for your 422xt xsporter model ladder rack.

view full answer...

Answer 2

The correct replacement c-clamp which is the part that holds the base to the bed rail on the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part #TH500XT is part #8523159001. If you need the bolt that holds the c-clamp in place you will…

view full answer...

Answer 3

Someone else recently had the same question. Another expert contacted Thule and found that Replacement Bed Rail Clamp for Thule Xsporter Ladder Racks - Qty 1, #8523159001, does indeed fit the Thule Xsporter ladder rack 422XT! This is the same clamp…

view full answer...

Answer 4

For a T-Rac Pro2 Truck Bed Ladder Rack #TH37003XT you would need the following components: Replacement 3/8"-16 x 5/8" Button Head Screw for TracRac Ladder Racks #TAHD-27051 Replacement Clamp for Toolbox Mount Kit for Thule TracRac…

view full answer...

Answer 5

From end to end, the extendable arm measures 30-5/16 inches for the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side #PVD20B.

view full answer...

Answer 6

Most of the time people want the pivot to swing out to the passenger side of the vehicle like what the part #PVP20B offers. This is because if you were for some reason on the side of the road and needed to get into the back of the vehicle you could…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 11

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...