Battery Terminal Recommendation with Stud Diameter of 5/16 inch

Question

Question:

need 5/16 stud on both + and - battery posts, do you have a top post lugs configured this way?

asked by: Ralph R

0

Expert Reply:

We have the Battery Terminal # DW05311-1 designed for use with a 5/16 inch diameter stud like you mentioned. We only have it in the color black though so you'd want to designate it somehow as either the positive or negative when you use it.

expert reply by: Jameson C

0

Answer 1

Yes you are exactly right on how the Roadmaster Smart Diode Kit part #RO44FR will work on your 2019 Ford Edge ST. It will function the taillights of your 2019 Ford Edge like a combined setup where the stoplight and turn signal will be on the same…

view full answer...

Answer 2

I can confirm that a vehicle with LED lights can absolutely use the Curt Universal Tail Light Wiring Kit for Towed Vehicles #C63CR.

view full answer...

Answer 3

To flat tow your 2020 Ford Edge you will need "smart diodes" as included in the Roadmaster #RO44FR Universal Kit. However, I would go ahead and get the Roadmaster #RM38FR kit that additionally includes the 7-way to 6-way cable and…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Battery Terminal Recommendation with Stud Diameter of 5/16 inch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching