Battery Terminal - Negative - Black Epoxy-Coated - Brass-Plated Wing Nut - 5/16" Stud

Video Transcript for Deka Battery Boxes DW05311-1 Review

Today, we're going to be taking a look at part number DW05311. This is the Deka clamp type battery terminal. This clamp type black epoxy coated battery terminal can be used to convert standard posts to marine or other special uses. The coating is going to aid in polarity identification and corrosion resistance. This is going to fit stud type batteries with 5/16 of an inch negative terminals. The wing nut here is going to be a brass plated wing nut and this right here is going to require a 12 millimeter socket or socket wrench in order to get that tightened all the way down. You got the opening right here. This is going to go around your existing post.

You place that over, tighten this down, again using a 12 millimeter socket or socket wrench. You're going to place your new connection on top of here and then simply tighten everything down with that included brass wing nut. A few measurements I want to give you real quick. Just measuring the overall length of the unit from edge to edge, it looks like that's going to give us a measurement of about 2 2/8 of an inch. From the center of where the existing terminal is going to be to the center of the post on this terminal is going to measure about 7/8 of an inch. That's going to do it for today's review of part number DW05311. This is the Deka clamp type battery terminal.

.