Bolt-On RV Bunk Ladder Mounting Bracket Recommendation

Question

Question:

I need about 400 ladder brackets so I can have a lean on the ladder.

asked by: Shane

0

Expert Reply:

We have ladder hardware like you are looking for as part # 2460. This gives you a bracket to attach to the side of the bunk and hooks for the ladder to attach to as well. This is the same hardware that comes with the part # LA-460.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The photo you attached did not come though but I have attached for you a list of all the bunk ladders that we offer. If you need one with hooks then I recommend the Surco RV Bunk Ladder part #SP503B which is 60" long x 12" wide but you can…

view full answer...

Answer 2

The Stromberg Carlson RV Bunk Ladder, #LA-460, measures 60 inches tall so if the loft bed has a rail not higher than 5 ft for the hooks, this would work for you. If you need a taller ladder take a look at part #LA-466B. This will measure 66 inches to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Because the face of the magnet rides against the armature (inside) surface of the brake drum, any grooves that had previously been worn into the armature surface will cause the magnet to wear unevenly. For optimal braking performance, you want…

view full answer...

Answer 6

For a permanent roof rack installation, the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long - Qty 2 #RTS502 can be used. Then you will want the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I have another option for you, but the grounding nut you show in your picture will interfere with the installation of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13207 you were looking at, and would need to be relocated.…

view full answer...

Answer 9

We do have bunk ladders available, though not from Jayco. Instead, I recommend checking out the Surco RV Bunk Ladder #SP503B, which is 60" long or #SP504B which is 66" long. These ladders have 1-1/2" hooks on them; if you need a hook…

view full answer...

Answer 10

We were not familiar with the term "coin in coin out" but are guessing that you mean the wheel can be used as an outer or inner wheel. If so we have the Dexstar #AM20783 16" Dual Wheel. Steen wheel with 8 on 6.5 bolt pattern and…

view full answer...

Answer 11

Though we will not have the direct replacement for your LT225/75R16 the closest tire and rim that we have is The Provider ST235/80R16 Radial Tire w/ 16" Vesper Silver Dual Wheel #TA96FR. The tire has a load range E, has a ply rating of 10 and…

view full answer...

Answer 12

We have a couple of options for spare wheels that may work on your Coachmen Leprechaun. You will want to measure the pilot hole of one of the rims currently on your motorhome to determine which one will work for you. 4.75 Pilot Hole - Dexstar Dual…

view full answer...

Bolt-On RV Bunk Ladder Mounting Bracket Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching