Camco Gen-Turi RV Generator Exhaust System Review Video

The Replacement 90-Degree Exhaust Pipe for Camco Gen-Turi RV Generator Exhaust System #CAM44812 you mention has an inner diameter of 1.53" and an outer diameter of 1.51".

The Ark Drop Down Corner RV Stabilizer Jacks - 2-1/2' Long Corner Steadies - Qty 2 #AR94FR you were looking at would do a great job of keeping your 2021 Rockwood Roo 21SSl steady, and offer a much larger foot than a standard scissor jack so…

The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center.…

The Lippert Components Trailair by Center Point Air-Ride Suspension Upgrade - Triple Axle #LC1565401 are an easy install that require no welding. The Air Ride Equalizers simply bolt into hangers to replace your current equalizers. The kit comes with…

I believe you mean Load Range since the Load Ranger was the unsuccessful brother of the Lone Ranger. For any given tire size there can be different load ranges. The different load ranges have different weight capacities. This has to do with the…

The Camco Gen-Turi RV Generator Exhaust System part #CAM44461 comes with several different adapters to fit a wide variety of exhaust pipe sizes. It will do an excellent job of reducing the noise output in addition to redirecting the exhaust gasses up…

The Camco Gen-Turi RV Generator Exhaust System #CAM44461 is a very basic exhaust extension, so your question about rain is valid. I reached out to the manufacturer and they said that there isn't an issue with any large amounts of water getting…

The smallest sleeve of the Camco Gen-Turi Transfer Kit, part #CAM44881, has an inner diameter of 1.23 inches and an outer diameter of 1.34 inches. It's 1-1/2 inches long. This is used to move the Gen-Turi RV Generator Exhaust System, part…

If you used wood screws in every hole of the E-track part #EM59150 that you referenced you'd have enough capacity to secure your 900 lb motorcycle. There isn't a one-size-fits-all method for installing the E-tracks but for your situation and…

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…

For your generator exhaust, the Camco Gen-Turi Replacement 30" EMT 90-Degree Discharge Pipe #CAM44812 is designed to be used with the Camco Gen-Turi RV Generator Exhaust System #CAM44461. With that being said, we have not tested the #CAM44812…