Will Inno Rack Feet # INRT101 Fit Bed Rails of 2018 GMC Sierra 1500 Crew Cab

Question

Question:

Is the INNO RT101 Compatible with a 2018 GMC Sierra 1500 crew cab

asked by: Dustin B

0

Expert Reply:

Yes, the Inno Feet # INRT101 referenced in your question will fit the bed rails of your 2018 GMC Sierra 1500 as long as you don't have the factory cargo management rails. If you do have the factory cargo management system then you will want to go with the C-Channel Mount model instead which is part # INRT102.

For the complete system that also includes the 79 inch long square crossbars you can use part # INRT101-79 if you don't have the cargo management system or # INRT102-79 if you do.

I have attached a short video demonstration that you can also check out.

expert reply by: Chris R

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 3

The exterior width of the 2022 Ram 1500's bed is 82.1". You'll be able to go with the longer 78" Yakima HD Crossbars item #Y01159.

view full answer...

Answer 4

Yes, to both of your questions! The Mountain Top EVO-M Retractable Hard Tonneau Cover with T-Slot Accessory Rails - Aluminum item #MNT29FR is confirmed to fit the 2021 Chevy Silverado 1500's with a 6-1/2' bed. It is also compatible with the…

view full answer...

Answer 5

Hello again, Dave. It is possible to mount the Yakima Ladder Roller #Y01163 upside down. We would not want the weight of the kayak on the roller during transport, but since you are using it just to load onto the J carriers it will be just fine.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...

Answer 8

The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT actually only fits on the black TracRac rails which have a raised section for the base to fit on (see attached), as opposed to the RetraxONE XR rails which essentially have a T-Slot. The…

view full answer...

Answer 9

The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part #Y01151-5855 is directly compatible with a Retrax XR Tonneau Cover so this is what I recommend using on your truck. This is an excellent setup that gives you a…

view full answer...

Answer 10

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Will Inno Rack Feet # INRT101 Fit Bed Rails of 2018 GMC Sierra 1500 Crew Cab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching