Mounting Clearance Needed to Install Lippert Tailgate Storage System Mounting Kit # LC432336

Question

Question:

Hi, How much room do you need between the back of the trailer and the bumper for the mounting kit LC432336 to work?

asked by: Jay B

0

Expert Reply:

I checked with Lippert and they told me that the Lippert Tailgate Storage System Mounting Kit # LC432336 that you referenced requires 4 inches between the bumper and the back of the trailer.

expert reply by: Jameson C

0

Answer 1

The Lippert Tailgate Storage System Mounting Kit part #LC432336 attaches to the frame which you can see below. Therefore, so long as the wall does not extend past the frame rails too much it should work. The included diagrams below should help to…

view full answer...

Answer 2

Yes, the Lippert Tailgate Storage System Mounting Kit part #LC432336 will work with a c-channel frame. That's actually what they are designed for since it's what most trailers use nowadays.

view full answer...

Answer 3

The RV Shower Panel #WAY72YR definitely looks a lot more complicated than it needs to, when it's actually super simple to install. You'll just remove the old faucet and handles and connect the hot and cold hoses to your pipes. You can…

view full answer...

Answer 4

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which…

view full answer...

Answer 5

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Answer 6

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

view full answer...

Answer 7

In order to haul a generator on the front of your vehicle, I suggest using a front mount trailer hitch such as the #13703. This is an adjustable type hitch that fits frames from 22" to 72" in width. It is not a custom fit but will require a…

view full answer...

Answer 8

A great style of bike rack for front hitches is the platform style. This will increase visibility when driving. A great bike rack for this is the Thule T2 Classic 2 Bike Platform Rack #TH9045, its is a great fit with your trailer hitch #65003. Most…

view full answer...

Answer 9

I have attached a photo for you with all of the dimensions I have for the Installation Hardware for Lippert Components Tailgate Storage System part #LC373965. If you need something that is not listed just let me know and I can go out to our warehouse…

view full answer...

Answer 10

The Lippert Components Flip Down Slotted Rack Tailgate Storage System part #LC243621 actually attaches to the bumper support brackets using the Installation Hardware for Lippert Components Tailgate Storage System part #LC373965. The bumper support…

view full answer...

Answer 11

The Lippert Tailgate Storage System Mounting Kit part #LC432336 which is what you will need to use to install the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System part #LC243621 is compatible with I-beam frames. I have attached…

view full answer...

Answer 12

The brackets part #LC373965 that you referenced basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded but you could also drill holes in the bumper and use included hardware to secure…

view full answer...

Mounting Clearance Needed to Install Lippert Tailgate Storage System Mounting Kit # LC432336

Product Page this Question was Asked From

Continue Researching