Replacement Mounting Bracket for 8k Kodiak Dacromet Disc Brake Kit

Question

Question:

Need to replace kodiac mounting bracket stamped cmb-133-da-1. This is mounted on an 8000lb dexter torsion axle. Hub and rotor are 1 piece dacromet.

asked by: THOMAS L

1

Helpful Expert Reply:

The Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB138HRDD is exactly what you are looking for. This is the correct mounting bracket for an 8k Dacromet Kodiak disc brake kit.

expert reply by: Jameson C

1

Answer 1

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 2

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 3

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 4

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 5

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 6

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 7

The Redline Bearing #31-73-3 is a cartridge style Never-Lube bearing that fits 42mm Dexter Never-Lube axle with 6 lug on 5-1/2 inch hubs with 3,000 lbs capacity like #8-388-80UC3. This bearing complete dimension are 42mm I.D. x 76mm O.D. x 39mm…

view full answer...

Answer 8

I spoke with my contact at Lippert regarding your existing motor/gearbox model 5973820. He stated that the correct replacement motor is the Lippert Components Kwikee Step Motor Replacement Kit #LC379608. This is a direct replacement for the motor…

view full answer...

Answer 9

Realistically it is best to stick with a Dometic replacement thermostat for your Dometic setup. The #DMC79FR is the correct replacement for your 3316410.012. It may be possible to use a universal thermostat like the #CAM09221 you looked at but this…

view full answer...

Answer 10

I have a solution for you, but the iRV #iRV64FR system does not play either Blu-ray discs of ultra 4k DVDs. To my knowledge there is not a system on the market that allows for the playing of those types of discs. However, you can plug an existing…

view full answer...

Answer 11

For a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 12

The standard torque on a Redline Trailer Wheel Lug Nut - 9/16 inch, part #6-53, is 135 to 145 ft lbs. This is the torque range that is normally used. If the instructions for the wheel are saying 110 ft lbs there might be a reason, like the wheel…

view full answer...

Replacement Mounting Bracket for 8k Kodiak Dacromet Disc Brake Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching