Can I Upgrade From 8 Inch to 15 Inch Wheels On a Boat Trailer
Question:
I never have liked the small 8inch boat trailer wheels. Other than a fender problem, can 15inch wheels be used?
asked by: Jon R
Helpful Expert Reply:
It is possible to switch from 8" wheels to 15" wheels yes but, in addition to fender clearance issues you will also run into not having enough surface area on the hub for the larger wheel size. For example, the Trailer Idler Hub Assembly part # AKIHUB-545-2-1K which is common on 2,000 lb axles and what I suspect you have only has enough surface area to work with 12" wheels max. Therefore, in order to upgrade to 15" wheels you will also likely need to upgrade hubs as well as fenders.
In order to recommend a new set of hubs that are compatible with 15" wheels I would need to know both your bearing and seal numbers. However, if you have a 2,000 lb axle then you won't be able to safely upgrade to 15" wheels because there is not a hub that will fit them with a large enough surface area to accommodate 15" wheels. Therefore, your best option would be a 12" wheel/tire combo like the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel part # AM30790 which has a galvanized wheel for maximum protection and load range c tire rated for use up to 1,045 lbs each.
Then for a new fender that will work the above wheels/tires, I recommend the Fulton Single Axle Trailer Fender part # F008550 for black or part # F008540 for white along with the Mounting Brackets for Trailer Fenders part # CE26065PGA.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 6 Inch Wide
- Brackets
- 2-1/4 Inch Tall
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- CE Smith
more information >
Fulton Single Axle Trailer Fender - White Plastic - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- No Step
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 7 Inch Wide
- 20 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- White
- Fulton
more information >
Fulton Single Axle Trailer Fender - Black Plastic - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- No Step
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 7 Inch Wide
- 20 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Product Page this Question was Asked From
Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 5.30-12
- 12 Inch
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Search Results: 4.80 4.00 8 tires
- Search Results: hubs
- Search Results: hub
- Q&A: What to Consider Switching from 8 inch Trailer Wheel and Tire to 12 inch
- Q&A: Width and Load Rating of 4.70-8 Tires Versus 4.80/4.00-8 Tires
- Q&A: Do 8 and 12 Inch Wheels Have the Same 4-Bolt Pattern
- Q&A: Can I Go from 10 inch Tire and Wheel Assemblies to 8 inch on my Enclosed Trailer with Ramp Door
- Q&A: Can I Replace 8 inch Wheels With 10 inch Wheels if the Bolt Pattern is the Same
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel w/ Offset - 5 on 4-1/2 - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H240 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H220 Review
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Trailer Wiring
- Video: Lippert Solera Slider Slide-Topper Review
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Fifth Wheel Hitch
- Search Results: 25580
on Trailer Tires and Wheels
