Optronics LED Interior Lights That Function on Dimmer Switch

Question

Question:

Im considering using the Optronics LPL11CB as an interior accent light in my resto-rod. They would be wired to the interior lighting circuit which has a 12V dimming switch. Are the LEDs dimmable?

asked by: Brent C

0

Expert Reply:

The Optronics LED Trailer License Plate Light # LPL11CB that you referenced WILL work on a dimmer; my contact at Optronics was kind enough to test it. This light operates down to 5.4V at which power input it is fairly dim.

Optronics LED Interior Light # RVILL33 is also a dimmable LED Light when used with a 12V dimmer switch (which we don't carry) and so is # ILL39CB.

expert reply by: Adam R

0

Answer 1

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

view full answer...

Answer 2

Yes, the Kenda Karrier ST175/80R13 Radial Trailer Tire #AM31990 will indeed fit on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. The spare tire carrier will work with virtually any 4 lug, 5 lug or 6 lug wheel. The #AM31990 wheel uses the…

view full answer...

Answer 3

In order to replace the light bulb part #67 inside of the Optronics Snap-In Mini License Plate Light part #LP11CB you will need to take a small screwdriver and then pry the light base away from the housing. I have attached a photo for where you will…

view full answer...

Answer 4

The thinnest material is 1/16" to fit the LED Trailer Mini Clearance and Side Marker Light with Grommet #MCL10AKB. You can connect the wires with the 22-18 Gauge Butt Connectors #05730-5.

view full answer...

Answer 5

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Answer 6

I would recommend Dexter Torflex axles the highest for torsion axles. And then put Al Ko and Lippert at about the same in quality. I was searching around online and the common consensus among the trailering forums is that the Dexter axles are…

view full answer...

Answer 7

Yes, for a wheel and Load Range D tire with the size you need of 205/65-10 on a white 5 lug wheel you would want part #AM3H430 or for a galvanized wheel instead you would want the part #AM3H440.

view full answer...

Optronics LED Interior Lights That Function on Dimmer Switch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching