Installing Wiring for Prodigy P3 Brake Controller on a 2010 Honda Element
Question:
where can I find wiring diagram hive installation instructions attached but do not see any wiring instruction
asked by: Michael C
Expert Reply:
The pigtail that comes with the Tekonsha Prodigy P3 # 90195 connects to the following functions:
Blue - 7-Way Output to Trailer
Black - 12V Power
White - Ground
Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed)
If the vehicle you are installing this on is the 2010 Honda Element that you put in for your vehicle info then you will need a 4-Way connector like the T-One # 118465 and then the Universal Wiring Kit # ETBC7. The blue from the brake controller will connect to the blue on the adapter from the ETBC7 unit, the black from the controller will go to the battery (with a circuit breaker in-line), the white will connect to a bare-metal point under your dash using the included self-tapping screw, and then the red wire should splice in to a green/white wire up under your dash. You will want to verify that this carries the stop light switch function with the included circuit tester.
Some videos have been linked for you to check out.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tire jack
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Shop: Trailer Wiring
- Video: Trailer Wiring Harness Installation - 2010 Honda Element
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: 7-Way Trailer Wiring Recommendation for a 2015 Ford F-150 with 4-Way
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Search Results: 22292
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Search Results: prodigy p3
- Search Results: prodigy p2 adapters
- Q&A: What Wires on 7-Way Need to be Connected to use Curt Echo Brake Controller
- Q&A: Recommended Circuit Breaker and Wire Gauge for Wiring 7-way Trailer Connector
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Spacer Kit for Timbren Suspension Enhancement System
- Shop: Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Trailer Hitch
- Search Results: brake controller
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Brake Controller
- Search Results: trailer brake controller
- Article: Trailer Wiring Diagrams
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: How to Choose the Right Trailer Hitch Class