Can LED be Replaced on Gustafson RV Reading Light # 277-000334

Question

Question:

My reading light goes on and off. Can and how is the bulb replaced or does the whole fixture have to be replaced?

asked by: Jolinda M

0

Expert Reply:

The LED bulb on the Gustafson RV Reading Light # 277-000334 is integrated into the assembly and cannot be removed/replaced. If the LED burns out you would just need to replace the entire fixture.

expert reply by: Chris R

0

Answer 1

The Gustafson RV Reading Light - Satin Nickel - LED - 3.24 Watt #277-000334 does not have removable LED bulbs. They are integrated into the light and to replace the burned out LED, you would need to replace the entire fixture, which for the price…

view full answer...

Answer 2

Since the Gustafson RV Reading Light #277-000334 uses an LED style bulb it would not be replaceable. It won't really need to be replaced though since LEDs tend to last almost forever.

view full answer...

Answer 3

Email me back with the picture you have and I'll take a look.

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Can LED be Replaced on Gustafson RV Reading Light # 277-000334

Product Page this Question was Asked From

Continue Researching