Amp Ratings for 2-Way Trailer Connector

Question

Question:

What is the amp rating on the vertical plugs? thanks

asked by: Scott

0

Expert Reply:

I reached out to the manufacturer, Buyers Products, who said that the 2-Way Trailer Connector - Horizontal Pins # 337TC2002 and 2-Way Trailer Connector - Vertical Pins # 337TC2012 can handle no more than 40 amps.

I have added links to video reviews of both connectors for you to check out.

expert reply by: Kyle S

0

Answer 1

You are correct in that connecting a trailer battery to the 12 volt port on a 7 Way plug will not charge it and will only maintain the charge on said battery. Odds are the people that are actually charging their batteries do either have the Redarc…

view full answer...

Answer 2

Yes, you will need to run a separate ground wire with the main power wire. So it would be best to use the Pollak 2-Pole Socket Connector #PK12801 with their 2-Pole Trailer Wiring Connector #PK12800 for your power wires. The physical connection from…

view full answer...

Answer 3

You'll need to solder the wiring to the pins that are in the 2-Pole Trailer Wiring Connector #pk12800. Basically you take off the black front section by removing the set screw and then run the wires through the back of the connector and solder…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Amp Ratings for 2-Way Trailer Connector

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching