Can Dexter Over Under Axle Kit Be Used on Trailer with Slipper Springs
Question:
I was going to order the dexter axle flip kit, but it says for double eye only. Why can’t I use it on a slipper spring?
asked by: Chris
Expert Reply:
The Dexter Trailer Springs Over-Under Conversion Kit part # K71-385-00 CAN be used with slipper springs. However, the process of installing this kit on a trailer with a set of slipper springs is more indepth than installing this kit on a trailer with a set of double eye leaf springs.
There are two issues that need to be addressed when using the Dexter Trailer Springs Over-Under Conversion Kit on a trailer with slipper springs, movement of the spring seat and dimensions of the u-bolt plate. Since slipper springs will shift back and forth as the trailer is in motion, the spring seats need to be fully welded to the trailer axle. In regards to the dimensions of the u-bolt plate, slipper spring are generally 2" wide and double eye leaf springs are generally 1-3/4" wide. This means that the u-bolt plate included with the kit will not work for you if your leaf springs are 2" wide. You will instead need to make your own which is fairly simple.
If you ask me, swapping out the u-bolt plate and welding the spring seat is easier and more cost effective than changing leaf springs and leaf spring hangers. According to Dexter Axle, the above process is permitted using the Dexter Trailer Springs Over-Under Conversion Kit.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Raising Height of Gooseneck Trailer with Slipper Spring Suspension
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Trailer Wiring
- Q&A: Why Cant an Over/Under Conversion Kit be Used on Slipper Spring Suspension
- Q&A: Do Trailer Axles Have to Face Certain Direction
- Q&A: How to Raise Suspension of Trailer that Has Slipper Springs
- Q&A: Can Dexter Over Under Kit be Used on Trailer with Slipper Springs
- Q&A: Solution for Low Car Hauler that Drags on Road
- Q&A: Can Over/Under Conversion Kits be Used with 2 Inch Wide Trailer Leaf Springs
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Ribbed U-Bolt Plate - 3" Diameter, Round Trailer Axle - 2" Wide Spring - 9/16" Bolts
- Shop: EZ Connector Custom Vehicle Wiring Harness w/ Magnetic 7-Way Trailer Connector
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Front Hanger for 2" Wide Slipper Springs - 5" Tall - 9/16" Bolt Hole
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Search Results: trailer lights
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: equalizer
- Video: SumoSprings Trailer Helper Springs Review
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: hitch
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Shop: Gooseneck Hitch
- Search Results: leaf spring