Does the Jensen Antenna Part # JAN139 Swivel/Tilt

Question

Question:

I have a 2004 Dodge Ram Pickup. I want to know if the antenna is rotatable after installation. I want to mount it vertically, but want to be able to lay it down for when I put my cover over the truck. Im trying to eliminate the need to put a hole in my cover Thanks

asked by: Dave

0

Expert Reply:

If by rotate you mean swivel/tilt then yes, the Jensen Antenna part # JAN139 is not a fixed antenna. As you can see from the attached video, the upright mast can be folded flat or swung upright. The base can also be mounted vertically or horizontally depending on your needs.

I have attached an additional photo to show the swivel/tilt feature for you as well. If this isn't what you were referring to then please just let me know.

expert reply by: Conner L

0

click to enlarge

Answer 1

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 2

I do have a solution for you however the Stromberg Carlson Folding Bumper Mounted Tire Carrier #TR-2 will not work with dually wheels. In order to mount your 75 pound Class C tire, I recommend looking into a hitch-mounted carrier like the Curt…

view full answer...

Answer 3

Most likely the stereo is fried since there isn't a fuse in this one like most other stereo systems. What you can do though is pull off the trim around it to get to the mounting screws and remove it from the cabinet. If you have done this and…

view full answer...

Answer 4

The 334850 part number you mentioned refers to the Replacement Control Switch #LC334850. This particular unit replaces the control switch assembly for certain Lippert Tread Lite RV Steps ( #LC353542, #LC353543, #LC353620, or #LC353621).

view full answer...

Answer 5

I looked up the dimensions of your Liteco 179 interior light and the closest thing we have to it would be the part #ILL06COB which will be 11 inches by 4 inches. Your current light is 19-1/2 inches by 6-1/2 inches so this would be a bit smaller but…

view full answer...

Answer 6

The only exterior light we currently carry compatible with 120v would be the Exterior LED Utility Light #M337FR. This light is a flush mount and would require you to cut a hole in the side of your enclosed trailer and would sit inside the walls/in…

view full answer...

Answer 7

I spoke to my Jensen representative about the Jensen Top/Side Mount Antenna part #44US01R and they informed me that the ground wire coming from the antenna can be attached to either the trailer frame or radio but the trailer frame is the preferred…

view full answer...

Answer 8

Here is a list of the Jensen radio antennas we currently carry. You can compare these with the one on the roof of your 2016 Thor Challenger 37LX to determine if we have an exact replacement or if you will need to remove the antenna from your roof to…

view full answer...

Does the Jensen Antenna Part # JAN139 Swivel/Tilt

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching